|
|
Build Your Online Product Catalogs?
| Product Name: |
Liquid Silicone for Injection Molding
|
| Supply Ability: |
8t/day |
| Related proudcts |
liquid silicone, injection molding, |
| Specifications |
HY-923 |
| Price Term: |
L/C,T/T100% |
| Port of loading: |
shenzhen port |
| Minimum Order |
200kg |
| Unit Price: |
8.88-9.88$/kg |
|
Description:
Liquid Silicone for Injection Molding is a two-component liquid silicone rubber for injection molding processes. The silicone rubber shows a higher productivity, high tran***rence, less yellowing and low volatile contents. It would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher tran***rency and less volatile content make it most suitable for consumer products.
Applications:
Because of the outstanding properties, The liquid silicone rubber for injection molding is particularly suitable for the following elastomeric articles: baby nipples, medical tubs, cake molds, food molds, sealing elements, O-rings, stoppers, diaphragms, keypads, bellows, vibration dampers, air vent flaps, switch covers, pressure cookers parts, cable connectors s.o.
Specification:
Vulcanisates consisting of liquid silicone rubber are distinguished by the following properties:
High productivity, high tran***rence
High flowability, low viscosity and short injection time.
Low volatiles content; Fast cure
Excellent mold release, Excellent Thermal stability
Excellent compression set; Excellent resilience
High stability to ozone and ultraviolet light
Outstanding resistance to ageing
Not readily combustible, does not melt or drip
Easy-pigmentable with LSR Colour Pastes fulfill the requirement of KTW
Processing Recommendations
Ready-to-use mixtures (of the components A and B) are fed directly to the injection molding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 1:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230, the addition –cross linking silicone rubber vulcanises free of dissociation products within a few sec |
| Company: |
Hong Kong hong ye jie co***ny
|
| Contact: |
Ms. penny91 peng |
| Address: |
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China |
| Postcode: |
518117 |
| Tel: |
+8618938867517 |
| Fax: |
+86-0755-89948030 |
| E-mail: |
|
|
|
|
Home
